2026 Ford Bronco Sport – Price in Canada, Specs & Trims

Issue

On certain vehicles, the front lower ball joint(s) may not have been installed correctly on the steering knuckle(s). As a result, the front lower ball joint(s) could separate and cause a loss of steering control.

Safety Risk

A loss of steering control could create a risk of a crash.

Corrective Actions

To reduce the safety risk Ford advises you not to drive your vehicle until the recall repairs are completed. Ford will notify owners by mail and advise you to contact a dealer to arrange for an inspection. The dealer will repair the front steering knuckle(s), as necessary.

Issue

On certain vehicles, the front passenger seat occupant classification system (OCS) may not work properly. As a result, the airbag system may turn off the passenger-front airbag even when a passenger is seated.

Note: This problem would cause the supplemental restraint system (SRS) malfunction indicator to display on the instrument panel, a warning to display in the driver information center and the airbag indicator light to display ''Passenger Airbag OFF''.

Safety Risk

An airbag system that doesn't work properly could increase the risk of injury in a crash.

Corrective Actions

Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the front passenger seat occupant classification sensor.

Issue

On certain vehicles, the exhaust gas recirculation (EGR) valve may not have been manufactured properly. As a result, the EGR valve could fail and cause a loss of power to the wheels.

Note: This recall only affects certain vehicles equipped with a 1.5 L engine, 2.0 L gas or hybrid engine or 2.3 L engine.

Safety Risk

A sudden loss of power to the wheels could increase the risk of a crash.

Corrective Actions

Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the EGR valve.

Issue

On certain vehicles, a software problem could cause the instrument panel cluster not to display when the vehicle is started. As a result, you may not be able to see certain information about the vehicle, including the speedometer, fuel gauge, warning lights and malfunction tell-tales.

Safety Risk

Warnings, tell-tales and gauges that don't display could increase the risk of a crash.

Corrective Actions

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the instrument panel cluster module software.

Issue

On certain vehicles, the cylinder head may not have been manufactured properly. As a result, the cylinder head plug(s) could fail. If this happens, engine oil could leak and cause a loss of power to the wheels.

Note: This recall only affects certain vehicles equipped with a 1.5 L engine. This recall could also affect certain cylinder heads sold at dealerships as a replacement part.

Safety Risk

A loss of power to the wheels could increase the risk of a crash. Oil that leaks onto hot components can create the risk of a fire. Additionally, an oil leak could create a hazard for others and increase the risk of a crash.

Corrective Action

Ford will notify owners by mail and advise you to take your vehicle to a dealership to inspect and, if necessary, replace the cylinder head.

Issue

On certain vehicles, the engine block heater could overheat when the block heater is plugged in.

Note: This recall only affects certain vehicles equipped with a 1.5 L or 2.0 L engine and a factory-installed block heater.

Safety Risk

An engine block heater and/or wiring that overheats or melts could create the risk of a fire.

Corrective Actions

To reduce the safety risk, Ford advises you not to plug in the engine block heater until the recall repairs have been completed. Ford will notify owners by mail. You can choose to have the dealer remove the block heater, or once the final repair is available, Ford will send you another notice to advise you to take your vehicle to a dealership to replace the block heater element. The dealer will also inspect and, if necessary, replace the block heater electrical cord.

Issue

On certain vehicles, the front lower ball joint(s) may not have been installed correctly on the steering knuckle(s). As a result, the front lower ball joint(s) could separate and cause a loss of steering control.

Safety Risk

A loss of steering control could create a risk of a crash.

Corrective Actions

To reduce the safety risk Ford advises you not to drive your vehicle until the recall repairs are completed. Ford will notify owners by mail and advise you to contact a dealer to arrange for an inspection. The dealer will repair the front steering knuckle(s), as necessary.

Issue

On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.

Note: This recall replaces Transport Canada recall no. 2025-554. Vehicles that were repaired under that recall don't require this repair.

Safety Risk

A short circuit can create the risk of a fire.

Corrective Actions

To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater. Alternatively, owners can choose to have the dealership permanently disable the engine block heater.

Issue

On one vehicle, the recall repairs completed by a Ford dealer during recall 25S26 (Transport Canada recall no. 2025-139) may not have been done correctly. As a result, another repair is required.

On certain vehicles, the powertrain control module (PCM) and body control module (BCM) may not detect a change in the charge level of the 12 V battery. As a result, the engine could stall. This could also cause the engine not to restart after a start-stop event and the hazard lights may not work.

Safety Risk

A sudden loss of power to the wheels or a vehicle that doesn't restart after a start-stop event could increase the risk of a crash. Additionally, hazard lamps that don't work could make the vehicle less visible and increase the risk of a crash.

Corrective Actions

Ford will notify the owner by mail and advise them to take their vehicle to a dealership to update the PCM and BCM software.

This recall was replaced by Transport Canada recall no. 2026-005.

Issue

On certain vehicles, the engine block heater could leak coolant. If this happens, the block heater could short circuit when it's plugged in.

Safety Risk

A short circuit can create the risk of a fire.

Corrective Actions

To reduce the safety risk, Ford advises you not to use the engine block heater until the recall repairs have been completed. Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the block heater.

Issue

On certain vehicles, a fuel injector may crack. If this happens, fuel could leak into the engine compartment.

Note: This recall only affects vehicles equipped with a 1.5 L EcoBoost engine. This recall replaces Transport Canada recalls 2022-658, 2024-160 and 2025-134.

Safety Risk

A fuel leak can create the risk of a fire.

Corrective Actions

Ford will notify owners by mail. As an interim repair, a dealer will update the engine control software to detect fuel injector leaks. Owners that have already received this software update will be informed that the interim repair is not required. Once the final repair is available, Ford will notify owners by mail and advise you to take your vehicle to a dealership to replace the high-pressure fuel rail assembly, high-pressure fuel injectors, and update the engine control software.

Issue

On certain vehicles, a software problem could cause the rearview camera image not to display when the transmission is shifted into reverse. Canadian regulations require the rearview image to display when the vehicle is reversing.

Safety Risk

A rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.

Corrective Actions

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the SYNC software.

Issue

On certain vehicles, the recall repairs completed by a Ford dealer during recall 24S24 (Transport Canada recall no. 2024-224) may not have been done correctly. As a result, a second repair is required.

On certain vehicles, the powertrain control module (PCM) and body control module (BCM) may not detect a change in the charge level of the 12 V battery. As a result, the engine could stall. This could also cause the engine not to restart after a start-stop event and the hazard lights may not work.

Safety Risk

A sudden loss of power to the wheels or a vehicle that doesn't restart after a start-stop event could increase the risk of a crash. Additionally, hazard lamps that don't work could make the vehicle less visible and increase the risk of a crash.

Corrective Actions

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the PCM and BCM software.

Issue

On certain vehicles, the recall repairs completed by a Ford dealer during recall 24S24 (Transport Canada recall no. 2024-224) may not have been done correctly. As a result, a second repair is required.

On these affected vehicles, the powertrain control module (PCM) and body control module (BCM) may not detect a change in the charge level of the 12 V battery. As a result, the engine could stall. This could also cause the engine not to restart after a start-stop event and the hazard lights may not work.

Safety Risk

A sudden loss of power to the wheels or a vehicle that doesn't restart after a start-stop event could increase the risk of a crash. Additionally, hazard lamps that don't work could make the vehicle less visible and increase the risk of a crash.

Corrective Actions

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the PCM and BCM software.

Issue

On certain vehicles, the powertrain control module (PCM) and body control module (BCM) may not detect a change in the charge level of the 12 V battery. As a result, the engine could stall. This could also cause the engine not to restart after a start-stop event and the hazard lights may not work.

Safety Risk

A sudden loss of power to the wheels or a vehicle that doesn't restart after a start-stop event could increase the risk of a crash. Additionally, hazard lamps that don't work could make the vehicle less visible and increase the risk of a crash.

Corrective Actions

Ford will notify owners by mail and advise you to take your vehicle to a dealership to update the PCM and BCM software.